Frequently Asked Questions
Q - Is Sharing the Internet let you Share files too?
A - Unfortunately there is a state
of confusion that derives from the usage of word Sharing for both Internet
Sharing, and File Sharing.
These two types of Sharing have to do with Network computers but they are not
practically related one the other.
Sharing the Internet allows you to share one Internet source (account) among few computers. This is usually achieved by using a Cable/DSL Router or a form of software called NAT (like Windows native ICS).
More info on Sharing Internet Connection here:
AnandTech - FAQ. Basic Options for
Internet Connection Sharing.
AnandTech - FAQ. Hubs, routers,
switches, DSL, LANs, WANs...?
Diagram of Broadband Internet Connection with
Cable/DSL Router.
Sharing Files and printers among computers that are Networked together is an independent process that can be done regardless of having (or not having) Internet service. If you want to share files between the Networked computers you have to configure the Network's Sharing setting on each computer on the Network, this process is the same for wired or and wireless connection, and has nothing to do with Internet How to set File and printer Sharing? http://www.ezlan.net/sharing.html
Q - CAT5e Straight or Crossover, what should I use?
A - When you have two (or more) devices that are transmitting and receiving through cable you can use straight cable connection. If you connect straight the transmit output to another devices transmit output put and the receive input to a receive input there would not be exchange of info.
The solution is to invert the cable arrangement inside so that the Transmit output of one device would go to the receive input of the other side. In the networking world such a cable is called cross over cable.
In addition RJ-45 (Network's port) can be wired inside Straight (on a computer) or crossover (on a Router/Switch).
As a result the type of cable that should be used depends on what type of ports you are going to connect
More detailed explanation here: CAT5 Straight, Crossover. What is CAT5, which one should I Use?
The general Rules of Cable connection are:
NIC to NIC - Crossover Cable. (Computer directly to second computer).
NIC to Hub/Switch - Straight Cable. (Computer to Hub/Switch).
NIC to Uplink - Crossover Cable. (Computer to Uplink on a HUB/Switch).
Hub/Switch (regular) to Hub/Switch (regular) - Crossover Cable.
Hub/Switch (regular) to Hub/Switch Uplink - Straight Cable.
Hub/Switch Uplink to Hub/Switch Uplink - Crossover Cable.
Cable/DSL Router WAN Side is an Uplink jack.
Cable/DSL Modem RJ-45 port is the same as a Switch port.
A lot of newer switches and Routers have MDX ports (look at your hardware Data Sheet), if such is the case it does not matter this type of port would adapt to the cable.
Q - How to Extend Network Cable. Or I ended up short on my Network Cable what shell I do?
A - You get a CAT5 Coupler (Radio Shack is one of the sources).
There are two types of Couplers.
1. Straight - Make two Straight patches into a longer straight Cable.
Straight Coupler
2. CrossOver Coupler - Makes two Straight patches into a longer Cross over Cable. CrossOver Coupler
Couplers are a good for on the spot solution, and might work well for long time. Eventually you are better of exchanging to one solid cable.
More about network Wiring here: Wiring - I would like to wire my Networked Computers (Home Wiring).
Q - My Network claims that my Cable is Unplugged?
A - Cable Unplugged is one of the ways that Windows
tells you that the computer can not use the Network connection.
It could be a loose cable with "iffy" connection, but many times it is Not the
Cable per-se.
If you are sure that the Cable is OK.
1. Check the Network parameters in the Computer’s Device Manager. Make sure that the drivers are installed correctly, there is No IRQ conflict, and No Ghost installation. http://www.ezlan.net/faq#ghost
2. Check the General Network Settings. http://www.ezlan.net/Installing#verify
3. Check (and repair if necessary) the Socket Layers, Winsock, and or refresh the TCP/IP Stack. http://www.ezlan.net/clean#refreshnet
If you need to Re-Install, log to this page it has a lot of links to instructions to Windows Network Settings, and Sharing. http://www.ezlan.net/Installing.html
Q – How to Configure a Laptop (or any computer) to connect to more than one Network?
A - If you have WinXP and need to configure
the computer for two independent connections, Windows let you configure two
TCP/IP stacks.
Click on Control Panel / Network Connection, and right click
on the active Local Network Connection to get the properties. Choose the
TCP/IP properties then the Alternate Configuration, and configure it with the
entries pertaining to your second Network.
If you do not have WinXP, or need more than two connections, or you are not comfortable with this setting, you can find an Inexpensive Utility that aids you in such a configuration.
Examples:
Net Switcher
MultiNetwork Manager
Mobile Net Switch
The above programs are offered as shareware they all work well; you can try and
use the one that is best for your specific needs.
Q - How should I adjust the Network Cards (NIC) Speed?
A- Click on Control Panel / Network Connection, and right click on the active Local Network Connection to get the properties. Click on the Network Card configuration and choose the working Speed (bandwidth) of the card.
In most cases it is best to choose the Auto Mode.
However if you are sure that all your components are 100Mb/sec. capable
and part of your Network seem not to be capable working at the right “Speed”,
you can try to force 100 Full (or duplex).
If the components are not capable to maintain the forced Speed your Network
might crush and you would need to adjust the Mode to its previous setting.
This procedure has to be performing on each computer on the Network and the
setting should be uniform across the Network. I.e. All Network Cards should be
on Auto, or 100 Full, etc.
The Network Cards menus might look different in various cards but the same
principles apply.
Info about the Actual Functional Speed of Windows Network can be found at this
page.
"Speed" (Bandwidth) expectation of Ethernet Home Networks using Windows 98/2000/XP.
Q - I have two Network Cards (NICs) on my Motherboard what can I do with them?
A - Most up scaled new Motherboards are sold with two onboard
Network Cards; many times, it is 1Gb/sec. cards.
Many End Users seek a way to use these NICs, looking forward to be able to use
them together and fulfill the quest for more Power.
There are configuration under which two NICs can be configured to “Team” and
provide more Bandwidth (Speed). However, this can be done when using a
Real Server OS (like Windows 2003) with special managed switches and teaming
software. I.e. professional hardware/software that goes into the
thousands.
The following can be done with regular computers that use Entry-Level
hardware and running client OS (like Windows XP).
If you have broadband Internet connection and No Cable/DSL Router, the two NICs
with conjunction of Routing software (like windows ICS) can be used to share the
wired connection.
If you have two Independent Networks, and you need to Bridge them a computer
with the NICs, running Win XP Pro can be used for bridging.
To make it clear 98% of End-User do not need the two usages mentioned above.
Why the manufactures provide two onboard NICs?
It cost less than a $1 to add the second card, and it is a good Marketing
Selling Point.
Q - How can I Keep the same IP for each Network Device.
While keeping the same local IP is a good idea for all Networked devices it is an utmost need in case of Networked Devices that are used by all the computers on the Network (Network Printers, or Networked Storage units).
If the IP of the devices mentioned above changes often the Network would work slow down and sometimes the devices would not be found at all.
In general there is two ways to assign a specific IP to a specific computer, printer, or other Network device.
1. Assign a static IP in the Device's TCP/IP Properties.
2. Use a Router that can do IP reservation within the DHCP (aka Static DHCP). Static DHCP means that the network device can be set to Auto Obtain IP and it would be always assigned with the same IP number.
If your Router can do Static IP, the computer's TCP/IP properties should be set to Auto Obtain IP, and the Router can be set to provide a specific IP within the DHCP range to be reserved for a specific computer/device according to the computer/device's MAC address. Read your Router’s manual for the specific setting.
Please note that providing this feature is not common to all Routers.
As an example most of Netgear Routers can do DHCP Reservation, while most old Linksys Routers cannot.
If this is an important feature read the Router’s manual before you buy. Almost all Routers manuals are available as pdf download on the manufacturers support site.
Note. Static IP, DHCP, and Static DHCP can be use at the same Router as long as the Static IPs are not within the range of the DHCP server (Read your Router manual to find what is the default setting of the DHCP).
Q - How to get Rid of Old Networks Names (Icons, links)?
When a user changes Network name, computer name, or and
relocates a computer from one Network to the other, residual annoying icons
(links) might stay around, leading to Nowhere and distracting users.
Some of these Icons are links that was created by the user himself, these Icons
(links) can be deleted and be done with.
Other icons, or links in the Network's resources folders might not be allowed to
be deleted.
Make sure that all the computers on your Network are assigned with the exact
Network Name, but have a unique computer name.
Look here, Old net-name
When everything settles down after few reboots, the previous Network's resources
will disappear by themselves.
Q - What is a Mapped Network Drive?
Important: Only Drives that were set correctly to be shared across the Network can be mapped. If you have Sharing problems, this might help: Sharing Disk Drives on Windows Network.
A - Mapping a Drive through
the Network allows you to treat the drives of other computers on the Network as
though there are additional drives on your computer.
Let say that we have one computer name Jack and another computer name
Nick.
Once you set the Network and the Network Sharing you can map the Drive C: of
Computer Nick to be available on Computer Jack and assign to it a local drive
letter Example: N (or any other available letter).
Once you do this Computer Jack has an additional drive N: that let you
do every thing that you can do with a drive (copy, move, delete, open file, Burn
CD, listen to music etc.) as though Nick’s C: is actually on Jack
(provided it was set to allow sharing.)
You can also map on Computer Nick a network drive with the letter J using
Jack’s C: Drive and you would have on Computer Nick a drive J: that let
you use Jack’s Drive C: on Nick.
Floppy, CD-ROM, ZIP, and USB drives can be similarly be mapped too.
Q - How to map a Drive?
A - Log to Windows Native Help, enter the term Map a Drive and it will guide you through the easy process of Mapping, or and disconnecting Network Drive.
Q - How to measure the Speed of transferring files between Networked Computers?
The simplest way would be to transfer a 10MB file between two computers
and measure the time.
As an example if it takes 10 sec. to transfer the file your “Speed” is 1MB/sec.
or 8Mb/sec. (B=Byte, b=bit, 1Byte = 8bits).
As a frame of reference these are some of the expected “Speeds”: Transfer Speeds
Qcheck by Ixia - If you would like to try in Pro Style.
The Software below is considered the unofficial Standard for Network
traffic. You use it for both Wire and or Wireless. It does not matter whether it
is Wireless or Wired since your Interest is in measuring the functional traffic
and not the medium.
This Free tool is a subset of Chariot which is considered the Standard in
evaluating Network Bandwidth connectivity.
Link to Product Description: A Free Utility for Network Troubleshooting from NetIQ!
After reading the page, log here:
Qcheck Download.
You have to give some info and your email, but this Application really worth it.
Down load the Main Program and a copy of the stand alone End Point.
You have to install the Master program on one computer (Main computer, or
serve). Install the End point Client on all other computers on the Network.
Q - Use USB device on the network.
A - Regular USB has two types of connections at the two sides of the cable that connects to the device.
1. Master Side that is plugged to a Computer and in order to process the traffic it needs the computer’s CPU and other part that are on the computer’s motherboard. The master side is usually the familiar rectangular large USB plug.
2. Client side, the sides connect to the peripheral device (Printer, Camera, mouse, etc. The plug is usually square or very small rectangular. Some small devices like Wireless thumb card do not use a cable and thus includes only the plug for the computer side.
It is not a matter of plugs compatibility, even if you find an adaptor that changed the size and the gender of the USB plug, the device needs to connect according to its original design.
As an example, plugging a USB Wireless card was designed to connect to a computer to a printer would not make the printer Wireless since the Card was not designed to work with the electronic circuitry of a printer.
There are special propriety USB adaptors that are built with inside
emulation of the computer USB circuitry (which usually makes them more
expensive) and therefore can be plugged into a None computer device that it was
designed for.
As an example, there is USB Printer Server (Wire, or Wireless) that can turn a
USB printer into Ethernet Printer Server.
USB printer server would work only with printers; it can Not be used to convert other USB devices to be Ethernet Network compatible.
To interface with a computer the USB device needs drivers, since you can not install the drivers on a passive hardware card as you install them on a computer, the drivers need to be incorporated within the device's firmware. That restricts the general use of the unit (I.e. you can not install in firmware all the drivers of every USB card that is available now on the market, and would be available in the future).
I addition the peripheral device itself has to be Network capable.
As an Example sticking USB to Ethernet on a Scanner will turn the scanner into a
Network recognizable device, since windows does not recognize regular scanner as
a Network device.
Q - Can I share my computer's
attached scanner with other computers on the Network?
A - Regular Scanners are Not Network Devices Native to
Windows and thus can not be shared while attached to a computer.
You need to buy a Scanner that is Network capable; such a scanner is plugged
directly to a Network port, and can be shred by all the computers on the
Network.
Brothers Brand has sub $200 “All in One “ units that includes a scanner and it
is Network enabled. Other Brands have similar Hardware. Network Scanners are
usually geared toward Office use and thus they are more expensive than regular
scanners.
There is software that can make a regular scanner Network able. Unfortunately
this software is expensive to the extend that you are better of buying a New
Network Capable scanner.
All In One Printer/Scanner/Fax/Copy Devices
All in One (AIO) units are posing a challenge as Network Devices.
All in One unit that is Network Ready can be connect with a network cable to any port on the Network (Some models can be made Wireless too by fitting it with a Wireless Client device that is used for game boxes), and all the functions can be used by all Networked computers.
If the unit is a regular unit (I.e. Not Network ready), it can only be connected directly to a single computer, or can be fitted with 3rd party printer server card, and connected to the Network.
However, all the functions of the AIO would be
available only if it connected to a single computer, and only to the Single
computer itself. Otherwise in any other scenario only the printer part would be
sharable over the Network. There are 3rd party devices
Software/Hardware that can turn a regular All in One unit to be Network capable
with all of its features, however these devices are more expensive than buying a
New inexpensive Network ready AIO unit.
As an example, Staples, and others, offer (2006-2007) Network Ready Brothers
Brand All in Ones for ($100-$150).
Sharing Regular Printer over the Network.
On the computer that the printer is connected to, log to Control Panel / Printer and Faxes, Right Click on the Printer to be shared, click on Sharing, check Share this printer and give it short simple name.
Make sure that you have the Printer Drivers on hand.
On the computer, that does not have a printer, log to Control Panel / Printer and Faxes, Click on Add a Printer, click next, and choose to install Network Printer, continue with the Wizard as instructed.
Q - Can I use Firewire to exchange files between two computers?
A- Yes, Firewire can be used to network computers and exchange
files.
However as is there are few limitations when using Firewire as the medium for
Network exchange.
You need Windows XP.
The sharing protocol has to be TCP/IP. Firewire uses IP over 1394 and does not
work with NetBEUI or IPX).
Maximum distance (length of cable) is 15 feet.
If your Motherboard has Firewire capacity Windows would install the
Firewire as a Protocol upon boot (It appears as 1394
Network Connection).
Once it appears in the Protocol list it behaves like and additional TCP/IP.
This page lists all the mediums that are Network capable in Windows.
http://www.microsoft.com/windowsxp/using/networking/getstarted/networktypes.mspx
Q - How I set my software Firewall to allow free traffic between my Networked computers?
A - Software Firewall intercepts the TCP/IP
traffic, since most of Windows Networked computers use the TCP/IP protocol for
local file sharing it might intercept and block the LAN’s traffic too.
Almost all Software Firewall includes a setting that let you to enter the IP
range of your Networked computers and thus allow free flow of TCP/IP traffic
between these computers without the Firewall's intervention.
This function is usually referred to as Computers in the Trusted Zone. I.e.
trusted to allow uncontrolled traffic.
I would use as an example one of the most popular software firewall Norton
Internet Security (NIS).
Open NIS main menu and highlight Personal Firewall, click on Configure and
choose the Home Network Tab.
Click Enter / Choose Entering Range and enter into the menus the lower and upper
IP range of your Local Network.
Example: Trusted Zone Screen Shot
The above is a Screen Shot of the Menu in NIS 2003 there might be variation of the process in other versions but the principle is the same.
The same applies to any software Firewall. It might use terms like Allows, Trusted etc. you might find the way to set the “Trusted Zone” by looking at the Firewall’s Help menu under the Local Network (LAN) section.
If you do not know how to obtain your Network’s IPs this might help.
How Do I Find my IP and MAC Numbers?
Using IPCONFIG and or Winipcfg (Wntipcfg). Utilities to find IP and MAC address, and other Local Network Info.
Q - What is Ghost Hardware Installation?
A – Ghost installation is an unofficial term
that is used by computer hobbyists to describe a none function (failed)
installation of a Hardware device in Windows OS.
In case of Network that might occur when installing a Network Card, Wireless
Device etc.
When you first install Windows or and add a Hardware device, Windows would first search its own data base and will install the appropriate driver for the device. If Windows does not find a suitable driver it will prompt you to point to the driver location. If you do not point to the suitable driver, or you abort the installation, a None Functional Entry would appear in Windows Device Manager. To indicate the problem a Yellow exclamation mark would appear next to the Device entry.
This yellow exclamation mark is called “Ghost Installation”.
Similarly if the correct driver was supplied but there
is resource conflict that is created by the Hardware the “Ghost” will appear in
the Device Manager.
Such a Device (I.e. a Ghost Device) would Not work, and might cause problems to
the whole system.
Screen Shot of Network Card Ghost: http://www.ezlan.net/network/GhostNIC.jpg
What to do?
Right click on the Ghost Device and Click on Uninstall, the Ghost will
disappear.
Make sure that you have the correct drivers and reboot the computer (Windows
will attempt on reboot to install the Hardware once more).
If the Drivers are OK and there is a resource conflict. Uninstall the Ghost,
switch off the computer and try to insert the device into another slot on the
motherboard.
Some times the Ghost will not clean itself easily. In such case Uninstall the
Ghost again, switch off the computer and take the device out (if it a device is
part of the Motherboard disable it in the BIOS). Boot the computer one time
without the Device. Windows will clean it self and get ready to the next
attempt.
Q - Monitor Network Resources, and Traffic.
A - To get your Network info.
Download this free util.
http://www.softperfect.com/download/netscan.exe
It is one Exe file notching to install. Put it on your hard drive and drag a
link to a spot of your choice.
Run the program, in few seconds it will show you all
the computers on the network, MAC addresses, pings, shares, and more (make sure
to look at the Options Menu, and check all the options that would like to see).
Make sure that if you have Software Firewall that all the computers are on the
Trusted Zone.
As far as Network traffic is concerned it is a more
complicated issue.
In order to monitor the traffic of a Network through a central point, the
Network has to be configured with Central Server Topology using Server OS (like
Windows 2003).
Small network that is configured as peer to peer with No central point that
allows reading of the traffic can not monitor the Network from one single
computer. Each computer needs a Monitor program and would report only its own
Traffic. Example of a free program that you can use,
http://www.analogx.com/contents/download/network/nsl.htm
Note: Most small Networks are configured around Cable/DSL Router, unfortunately, Entry Level Cable/DSL Routers do not provide the capacity to read the traffic that passes through.
Q - By pass Windows Logon Name and Password.
A - Many people have a computer that is used by one person and feel
that they can forgo the Logon process. There few ways to go about it. One
of these is to use Microsoft TweakUI. TweakUI is a free Power Toy utility that
can be downloaded from Microsoft. Among many other helpful enhancement,
Tweak UI allow Auto Logon that can easily made Active, or In active if
necessary. It looks like this,
http://www.ezlan.net/example/tweakui.jpg
Power Toys page here (look at the right Center and download TweakUI.exe),
http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
Q - Changing Local Area Connection’s Number.
A - When Windows is freshly installed, the Local Area Connection number would be #1. However, every time a deletion reinstallation etc. is done to the Network Card, the number changes upward. Therefore, even if there were only one connection it would look like this, http://www.ezlan.net/example/lan_num.jpg (says #7, but I have only One).
Functionally this "miss numbering" does, means anything and it does not
affect the Network components. For some users it causes an imaginary
problem, however, the problem is human Psychological Distraction rather than a
computer/network issue.
It is possible to reset the connection to read #1. However, it is a
tedious process that involves dealing with hidden Network components, multiple
changes, deletions in the registry, and with a need to reboot the computer many
times.
The end might result with a “Trashed” system. So the best advice is “Let it Go”.
Q - TCP/IP Connection's Details.
A - TCP/IP Connection Details.
Windows XP provides a way to see the information about the Network’s settings
parameters. If you have a connection icon on the tray bar click on it
(Otherwise, log to the Control Panel/Network connections. Double click on
the Connection Icon).
Choose the Support tab, you should see this screen, it provides very basic info.
http://www.ezlan.net/example/lan_support.jpg
Click on the Details button and see this, http://www.ezlan.net/example/lan_details.jpg
Q - Router or Switch, what do I need?
A - A Switch is used to connect few computers
together. If you do not need to share Internet Connection and you are
building a Network you need a switch.
If you have a Network of few computers and you have only one
Internet account with one available IP, you can not connect a Switch/Hub
directly to the modem. Since you have only one Internet address the
Internet signal would know to which computer it belongs.
Hence comes the typical Entry Level Cable/DSL Router that includes Network
Address Translation (NAT) circuit that Routes (Splits) the Internet signal to
few computers.
Almost all of the Entry Level Cable/DSL Routers are a combo unit of a Routing
circuits and a 4 ports switch.
So if you need to share the Internet and connect few computers together you buy
a Cable/DSL Router and you get a switch in the same box.
More about Cable/DSL Routers -
http://www.ezlan.net/routers1.html
Q - I need a Wire only Router would should I get?
A – Look around for bargains and do not be surprised if you would find
that a Wireless Cable/DSL Routers are less expensive than a Wire Only Routers.
In other words you can buy a Wireless Router, disable (or block) the Wireless
part and use the Wire part.
As for Wired Routers, which brand? It does not really matter, for regular
use get the cheapest that you can find.
Otherwise if you have special needs you have to define them and look through the
data sheets/manuals of the Routers sold by the major brands and make sure that
the Router would support your special needs. (Data sheets of network Hardware
can be downloaded from the manufacturers Web sites support section
More about the Special needs here:
Routers
Wireless Choices here: Wireless
Hardware
Q - I want to be secure, do I need to use a Cable/DSL Router Firewall and an additional Software Firewall?
A - Yes you do. A Cable/DSL NAT Firewall provides only partial one way (Internet In) protection. To insure Global protection of your computer/network you need to add the comprehensive capacity of good software Firewall.
More here: Basic Protection for Broadband Internet Installation - Routers and Firewalls.
As a frame of reference, the best “Speed” of Dialup is 53Kb/sec. that would yield about 6KB/sec. of optimized download.
Optimizing & Measuring the "Speed" of Internet Connection.
“BAD” lines might reduce the Speed so it is recommended to
make sure that you have a Good line from the NID (the Telco line in box) to the
computer.
If money is No an object you might find a Dialup ISO that provides a Bonded
Dialup service. With a special modem and am account with such a provider, you
might be able to double you Dialup Speed.
Example: Bonded Dialup Service.
If you would like to Network and share Dialup, and or use
Wireless this might help.
Sharing the Internet with Dialup Connection.
Would I get faster Internet if I subscribe to one of these services that “promise” Dialup that is fast as DSL?
When you subscribe to the service, you get an account and you do all your
Internet activities through their Server. Since all your traffic goes through
their server they, can selectivity cache and compress part of the files that are
involved in the surfing process.
If you log frequently to a site that uses large uncompressed html files you
might experience some improvement.
Downloads of Files would not benefit from this arrangement since
downloaded files are already compress, being one time affair (i.e.
downloading a specific file) they would not be available in the cache to begin
with.
If log frequently to site that do not frequently updated you might experience
slight improvement since they probably will be already cached on the server.
In sum, the mainstream average surfer will not gain from such a concoction.
People that do not download much and visit the same sites on a daily might gain
a little.
Q – I have an issue with my Computer’s Ports, what is going On?
A - Hardware wise Computer’s ports are always
Open.
If the Computer's ports would not be internally Open the computer would Not
function.
However, since the ports are also used for Outside Communication it is advisable
to close the ports to the outside in order to be able to control In and Out
communication.
Closing Ports is done with a Software Firewall or
and a Cable/DSL Router.
If you do not have Software Firewall or a Router your computer's ports
are Not Closed.
There are applications/games that work on your computer and need to interact with the Internet, or and your LAN. Each application might use specific ports that need to be open so that the application can access the Internet/Network.
To make sure that the ports are not blocked on your Local Network (LAN) Read this: http://www.ezlan.net/faq#trusted
Application's Ports are Specific to each application and you would find the info. on the application/game manual or support site.
The way to open ports is specific to each Router, or and Software Firewall. You have to look at the software/device manual to find the instructions.
This page describes the issues and what to do about it:
Cable/DSL Routers - NAT & Ports.
This page describes ports issues with ICS:
http://www.practicallynetworked.com/sharing/ics/icsconfig_maps.htm
This page describes ports issues with Windows native Firewall:
http://support.microsoft.com/default.aspx?scid=kb;en-us;308127
Note* Windows XP SP2
comes with a Software Firewall installed and Switched On. I.e. The ports are
closed by default with Windows native Firewall. If you disable the Firewall all
the ports are going to be open but you would not be protected from Internet
attacks.
Note** If you share Internet connection with ICS,
the client computers port would be closed since ICS is a form of software
Router/NAT
Q - Adding Wireless to a Wired Network.
A - To add Wireless to an existing Network you need
to buy an Access Point and plug it to an available RJ-45 port on a switch/hub or
Wired Cable/DSL Router.
Equipped each computer that you want to make Wireless with a Wireless Client
card, configure and enjoy.
You can read the pages in the following link for further information and actual
instructions:
http://www.ezlan.net#wireless and
http://www.ezlan.net/faq#wireless
Q - So many thing are called Wireless, do they work together? - Wireless and Network terminology.
A - One of the confusing aspects related to the world of Networking is the use of the same terminology to describe unrelated or partially related functions.
The term Wireless is used to describe: Wireless LAN,
Wireless Internet, Wireless Phone, Wireless keyboards/mice, etc.
Do not let the usage of the word Wireless confuse you. Technology wise all
of the above are Independent types of hardware each type using its own
technology and there is No relations between them as far as proper computer
functions goes.
Most confusing is the issue of Wireless Internet,
it is usually describing the way the Internet service is obtained rather
then a specific nature of the technology.
Wireless Internet can be a feed from Satellite, Surface Wireless service,
Cellular phone, or a close by Ethernet Network (like in Internet café).
Each one of this methods are not compatible with the other and have only one
purpose to brink Internet to your system. It is not providing Wireless
Network.
A connection to an Ethernet Network (usually from a Wireless Cable/DSL Router Access Point) is the only form of Wireless that is similar to regular Wireless Network (802.11x), all the others are independent types of technology that not related to consumers Networking hardware.
In other word if you want to Network with Wireless you need to make sure that you get a 802.11b. or 802.11g or 802.11n system.
This web site is dedicated to Networking therefore you would find extensive info about Wireless LAN here: http://www.ezlan.net#wireless
Q - Disabling SSID, would my Wireless Network be more secure?
A -The SSID is necessary for proper Wireless
function. and need to be set On.
Thinking that Disabling SSID is really adding security to your Network is false.
Regardless of the status of SSID, any serious intruder can use free widely available sniffers and will find your Wireless connection.
Disabling SSID makes you partially invisible to
innocent leeching neighbors.
You can use MAC filtering and it would provide better security against innocent
leecher.
For more technical info concerning WinXP and the changes in Vista, see here, http://www.microsoft.com/technet/network/evaluate/hiddennet.mspx
More about Wireless Security:
Wireless
Security Configuration
Wireless Encryption -
WEP, WPA, and WPA2 (802.11i).
Network segregation -
Adding security to Wireless Network (or any peer to peer Network).
Q - I need a Wireless Card what should I get?
A - Wireless cards come in variety of flavors.
The three basic types are PCMCIA, PCI and USB.
When it comes to Entry Level Wireless Clients almost all of them are based on
the core of the PCMCIA cards.
The so called USB is usually PCMCIA card connected under the plastic to a USB
interface.
The so called PCI is PCMCIA plugged or soldered to PCI interface board.
Since the PCI and the USB are PCMCIA with additional interface circuitry and
different buses the performance resultant is some what less (about 5%-10%) than
pure PCMCIA.
What shell I use?
For a Laptop the regular PCMCIA is the best solution,
For a Desktop (or tower case) USB Wireless Client Card should be considered as
the preferred solution.
Why?
Wireless is depending on signal propagation.
PCI Wireless Client Card ends up been stuck behind the computer's case,
resultant in obstructed transmission and poor performance. USB is
connected to the Port with 2-3' cable allowing the Antenna to be placed above
the System for better Transmission.
However a PCI card is a good choice if it equipped with a Removable Antenna.
In such case you can you can fit a good External Antenna with a short coax wire
that let you place the Antenna above the system and would provide much better
wireless signal.
More about Wireless here: http://www.ezlan.net#wireless
Q - Why I see Wireless connections that are not mine in my Wireless Network display?
A – When looking at the available Wireless Networks, many people see additional Wireless connections that do not belong to them in the Wireless Network display. The tendency is to react with a combination of Anger and or Fear feeling that there might be an invasion to our privacy.
Wireless Signals are propagating through the air like any other "Radio"
signal.
As a result any Wireless Networks in your reception area (yours and others)
would appear in the list of available sources. (Just like your Radio/TV that
can receive all the Radio/TV stations in your area and you choose the one that
you want to use).
If you do not want to use the Wireless connection at all and your computer
came configure with active Wireless, switch it Off.
Most computers with preinstalled Wireless come with a physical switch or a
combination of the Function button and allow easily to switch off the Wireless
Network Card (read the computer manual concerning your Wireless).
Otherwise Secure your Wireless to the Max. that your Wireless hardware allows.
The probability that some one would actually be
able to log and use your Wireless Network if the Wireless Security is
adequately set is extremely low.
You can find extensive information and instructions concerning Wireless
Security in the following pages:
Basic Wireless Security -
http://www.ezlan.net/Wireless_Security.html
WEP, WPA, and WPA2 -
http://www.ezlan.net/wpa_wep.html
Wireless Segregation -
http://www.ezlan.net/shield.html
There are few Entry Level Wireless Gizmos that have settings to eliminates the display of the unwanted sources from the list; it is an artificial arrangement to make people feel good, programs on your computer can not eliminate the real presence of the transmission in the air.
Q - I do not have a Wireless Icon in the Tray Bar.
A - If your Wireless connection works OK using Windows Wireless
Zero Configuration, and you do not have a Wireless connection Icon in the Tray
Bar.
(Same process applies to a Wired connection Icon),
Click Start /Run Type into the Run box: control ncpl.cpl
click Ok.
You see now the Control Panel's Network Connections.
http://www.ezlan.net/example/nets.jpg
Double click on the Connection Icon and click on Properties.
Check the two Boxes at the lower left Side.
http://www.ezlan.net/example/tcp.jpg
Q - I have a Wireless Cable/DSL Router and few computers can I use all the computer as Wireless with No Wired computer?
A - Yes, Technically you can. However, if you do not have at least one Wired connection to the Router you might not be able to configure the initial connection, and if the Wireless for some reason stop working, you would not be able to connect to your Router in order to Fix it.
Therefore it is Highly recommended to connect at least one computer via wire to a regular RJ-45 port on the Router so you can configure the Wireless Router.
More info here: Wireless - Basic Configuration. and here Wireless - Security Configuration.
Q - I have a Good Firewall does it secure my Wireless?
A - Bear in mind that though the same word Security is used to describe
Secure Internet Connection and Secure Wireless from a Computer functioning
perspective there is No relation between the two.
Wireless Security has Nothing to do with securing the Internet Connection.
Wireless is just a replacement for a Wire and thus can be intercepted by people
in the neighborhood attaching them self to your Signal and use your LAN and your
LAN's Internet Connection. To avoid Local Tapping there are Wireless Security
measures. These measures are unique to the Wireless components, and have to be
used even if there is No Internet Connection.
These short pages describe the basic principles of functional Wireless Security.
Wireless Security -
http://www.ezlan.net/Wireless_Security.html
WEP, WPA, and the Future -
http://www.ezlan.net/wpa_wep.html
Network Segregation -
http://www.ezlan.net/shield.html
Cable/DSL Router Hardware NAT and Firewall/AntiVirus/AntiSpy applications are
the ones that protect the Internet connection from being invaded/infested, and
preventing your LAN computers (Wired and Wireless) from transmitting out to the
Internet privileged information.
All the computers (as a Network) would have basic Internet protection by using a
Cable/DSL Router. In addition, each computer on your Network that has access to
the Internet should have its own Internet Connection protection regardless of
whether it uses Wire or Wireless.
Internet - Basic protection: http://www.ezlan.net/firewall.html
Assemble Freeware Security suit for Internet Connection:
http://www.ezlan.net/security.html
In addition you should have tools available to clean your computers if they get
Infested with Internet "Junk".
Internet Infestation - http://www.ezlan.net/infestation.html
Basic Steps in cleaning Internet "Junk" -
http://www.ezlan.net/clean.html
Q - How many concurrent users can surf the Internet through the same Wireless Connection?
A - For basic smooth Internet surfing a
wireless signal that maintains a bandwidth of 1-2Mb/sec. is needed.
A typical good 802.11b would provide 4-8Mb/sec. I.e. 2 to 4 good
concurrent connections (users). Up to 8 if it is not heavy clicking.
A good typical 802.11g would provide 18-24Mb/sec. I.e. 9 to 12 good
concurrent connections (users). Up to 20 if it not heavy Clicking.
The above assume good connection with all users within good range from the
Wireless Source.
Q - My Wireless Suddenly does not work any more. What shell I do?
A - Many people seem to experience sudden interruption of their LAN
Wireless connection.
While it might be an indication of “trouble”, few variables can be checked first
before declaring a “State of Emergency”.
1. Switch your computers Off. Switch your Wireless Router Off, Switch your
Broadband Modem Off.
Wait 2 minutes, Switch the Broadband Modem On, when the Modem Lights stabilized
(about 1 min.) Switch the Wireless Router On, and Switch the computer On.
2. Make sure that you SSID Broadcasting is On (It is a setting in the
Wireless Router/Access point.
http://www.ezlan.net/faq#ssid
3. Check the Wireless Card Drivers and make sure that the Power saving is Off.
4. Try to change the Wireless transmission channel ((It is a setting in the
Wireless Router/Access point).
5. Make sure that there is No sudden activity of 2.4GHz Cordless phone.
6. If you are using Software Firewall (it does not pertain to
the Router’s Firewall) try to temporary disable it. If the Wireless comes,
back check the Firewall setting to make sure that there is No blockage of local
traffic.
7. Check the Device Manger to make sure that you still have a valid hardware
installation of the Wireless Card.
http://www.ezlan.net/faq#ghost
If none of the above helped place the Wireless Computer next to the
Wireless Router/Access Point, disable the Wireless security and reconfigure the
Wireless Connection from scratch.
This might further help.
The next Standard of WIFI Wireless 802.11n is in the Final Process of to Hopefully be published toward the end of 2007.
During 2005-6, few manufacturers made offers of Wireless Hardware released under the label of pre-N, or Draft-N, or MINO like.
This hardware is Not going to be upgradeable to the final 802.11n standard.
Many people ask about the performance of the preN as compare to 802.11g.
Wireless range is highly dependable on the specific environment so take the following number with a “Ton of Salt” (as oppose to a grain of salt).
Judging by the current per-N
Typical 802.11g at 10’ = 22Mb/sec. Pre-N = 30.3 Mb/sec.
Typical 802.11g at 60’ = 15Mb/sec. Pre-N = 25.7 Mb/sec.
Typical 802.11g at 120’ = 5Mb/sec. Pre-N = 19.8 Mb/sec.
Typical 802.11g at 160’ = 1Mb/sec. Pre-N = 8.9 Mb/sec.
Since the MIMO devices, were rushed out to cash on consumer impatience there is only Basic Routers, and Client Cards. Take into consideration that the whole gamut of other Wireless Devices that are needed for flexible configurations are not currently available in MIMO, and the future devices would not be compatible with the current one.
A set of preN, Wireless Router and one Card can cost $180 - $250.
preN Routers are just mediocre 802.11g
units unless you buy the expensive matching preN card. If you have a laptop or
other computers with pre-installed 802.11g cards, there is No benefit from a
preN Wireless Router.
I rather buy a good 802.11g for less than $40, and "Ditch" it later, instead of spending $100 for the Router, and close to $100 for every additional card, that would be obsolete in short period of time when the 802.11n standard comes out.
* Your Mileage might vary under certain situations, the extra distance provided by some of the preN can provide immediate solution to an acute problem.
Q - WEP pass phrase (password) does not work.
A - Wireless hardware from different
manufacturers might produce a different Hex string when using the same ASCII
pass phrase.
Generate a Hex String from a pass phrase in the Router, and then copy the actual
string to the Wireless card WEP entry.
Example (Linksys WRT54G), http://www.ezlan.net/example/wepstring.jpg
The Router is configured to start with the first key. Copy the 10 digits that
are in Key1, and paste it into your Wireless Card WEP entry.
Msc.
Q - My Computer/Network is generating a lot of action even when I am not doing any thing. I checked for Viruses Trojan’s etc. and it seems that the system is clean. What shell I do?
A - This type of activity might be produced in few ways. You have to find the source ant try to terminate it.
1. Internal activities related to the computer
management system that are done while “Resting”, like Indexing, updates, backups
etc., or some rouge Process or and program that are busiest at rest time.
You can use these two free programs to find out what is unnecessary loaded at
Startup and what is running and active in memory:
Stratup - Processes
2. If the excessive traffic is LAN related you can use this utility to
find out which ports and IPs are involved:
TCPview
3. If the excessive activities are Internet related you can use a software
Firewall log to find out where it is coming/going from/to.
Q - How can I get a link to switch between the cool Vista 3D Open Windows choice.
A - Click on the Vista Start button and type into the Start Search box the following line.
C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch
A Window would open with an icon to Windows Switcher. Drag/send a Short Cut of this icon to a location of you choice.
You can find much more pages on the issue of security in this website main page